Temp Vent Series 6 - Where to buy Temp Vent Automatic Foundation 6 Series - Black, Grey, Brown - $49.95 for Sale with Fast Free Shipping!

Temp Vent Automatic Foundation 6 Series - Black, Grey, Brown take the worry out of remembering to open and close vents as the weather changes.

The vent has a bi-metal coil to open and close automatically without electricity. When the temperature reaches 70°F the vent is fully opened to provide fresh air, and fully closes at approximately 40°F to conserve energy and protect pipes.

These Automatic Foundation Vents are easily installed using included screws, or screw anchors and retaining clips with vent.

No mortar, power, electric is required for installation and operation.

Size to fit : 16" x 8"

Actual size : 17 1/2 x 9 3/4 (outside)

                  15 1/4 x 7 1/2 x 4 1/2 (inside)

Model : TV6BL - BLACK

            TV6BR - BROWN

            TV6GR - GREY

            TV6WH - WHITE (Not available)

This 6 series is one piece.

Included bolt kit (4 of bolts, 4 of nuts, 4 of retaining clips)

Manufacturer Warranty : 5 Years                 

To Specify:
Whenever possible, vents should be placed on all sides of the foundation. This will create an intake/exhaust system that delivers a steady flow of air. One vent should be installed for each 8 to 10 feet of foundation wall.

Most building codes require 1 square foot of open ventilation area for every 150 square feet of crawl space. Temp Vent Automatic Foundation Vents have 50 inches of net free area per vent. Therefore, you should install one vent for every 50 square feet of crawl space.

For crawl spaces with polyethylene installed, on 80-90% of the floor, the ventilation requirement changes to 1 square foot of ventilation for every 500 square feet of crawl space with a minimum of 4 vents installed to provide cross ventilation. For crawl spaces with polyethylene, install at least one vent for every 500 square feet of crawl space.